Simple Scraper V - 12" scraper for steep inside walls and bottom finishing

Simple Woodturning Tools SKU: SS5 Oval Barcode: 703670141898

$121.49

Style: Oval
Handle Selection: Unhandled

Available Now!

Simple Scraper V - creating steep or straight inside walls and bottom finishing (12" length)

With four cutter choices (2 oval and 2 rectangle) suitable for nearly any project or material!

What are the benefits of this tool?

  • The widest and most unique carbide scraper on the market is now available in a longer length for reaching inside hollow forms!

  • When combined with the 17" long foam grip handle, this becomes a beefy 26.5" long tool ideal for great leverage and control.
  • Recommended to bundle with our flat scraper tool rest to minimize tool overhang and improve surface finishing.
  • This tool works in the Simple Hollowing System for extended reach vs Simple Scraper II.
  • Beneficial on every project from small pens to large bowls and everything in between because you can shape and finish with a single tool.

  • Quickly remove tool marks and create silky smooth profile transitions between inside and outside curves, as well as straight wave free lines.
     
  • Makes a perfectly flat bottom with a smooth transition to the foot using the oval cutter, or a square corner using the rectangular cutter.

  • Creates a smooth finish with much less tearout and minimal sanding.

 Why are there different cutters?

Oval Cutters:

The oval cutter is great for shaping and finishing, combining the usefulness of a square AND round cutter into a single tool.  

  1. Oval cutter (for wood)- The oval cutters are perfect for virtually any curved shape imaginable especially on the outside of your project.

  2. Oval negative rake cutter (for epoxy/resin, hybrid and wood)- Like the oval cutter but the negative rake grind also makes this cutter less aggressive. This reduces chipping in very hard materials (epoxy/resin), can reduce tear out in softer materials and provides a great finish in both man-made materials and harder woods. Because the negative rake grind is less aggressive, many people find it easier to use.

Rectangular Cutters:

The rectangular cutters make it simple to create square inside corners, beads and straight lines. Perfect for the inside and outside base of any project. 

  1. Rectangle cutter (for wood)- This cutter shines on the outside of bowls, hollow forms, vases, platers, and wooden pen blanks. You'll also love it for simple spindle work too. Another place you’ll love this cutter is on the inside of a box.

  2. Rectangle negative rake cutter (for epoxy/resin, hybrid and wood)- Like the rectangle insert but the negative rake grind makes this cutter less aggressive. This reduces chipping in very hard materials, can reduce tear out in softer materials and provides a great finish in both man-made materials and harder woods. Because the negative rake grind is less aggressive, many people find it easier to use.

  3. Replacement carbide cutters can be found here

How Do I Use the Simple Scraper?

  • Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line.
  • Place the tool on the tool rest with the tool shaft parallel with the floor.
  • While securely holding the tool slowly move the carbide cutter into the work.

 


Outside bottom of bowl being finished.

Photo of a bowl being held with the simple vacuum chuck while completing the bottom finishing with tailstock support and a thin live center. The tool will not hit the tailstock. Also shown with flat scraper rest for additional tool support.


In use below on the inside wall of a tall bowl.

Shape and finish the inside wall of projects with steep or straight walls such as tall bowls and boxes.

Shown with flat scraper rest for additional tool support.


What are the Details of the Tool?

  • Carbide cutter size: 1.18" x .50" x .10" thick
  • Tool measures 1" wide x 3/8" thick x 12" long. Handle tang is 3/8" square (fits in 1/2" hole) x 2.5" long, so tool length once it's in the handle is 9.5".

Handle Options:

  • Can be used with Simple Hollowing System. Fits 1/2" diameter standard tool holder. Tool length when held in tool holder is 9.5"
  • If used with Full Size Handle with Foam Grip - Tool and handle length is 26.5".
  • Tool is available unhandled if you'd like to turn your own handle.
  • Does not fit mid size handle. Requires handle with 1/2" dia hole.

When will my order ship?

  • We ship as soon as possible - most of the time within 24 hours of order placement. (Orders placed on Friday after 10am CST, Saturday or Sunday will ship Monday)
  • You will receive an e-mail with tracking from us when your order ships.
  • All orders ship from Ramsey, Minnesota.
  • ALL orders shipped through the USPS are not guaranteed to be delivered within the window that they promise. The USPS does not offer guanranteed delivery on Priority Mail packages, so we will not issue postage/shipping refunds if they do not deliver on time. You can read about this on their website HERE
  • We ship worldwide either with the USPS or UPS.
  • International orders: Shipping cost will be calculated during checkout and will NOT include your local duty and/or customs fees. If you choose UPS, they will not deliver until these duty/taxes are paid.

I'm a local customer, can I pick up my order?

  • Yes you can. We just need time to pack your order. Please place your order online and add notes during checkout that you want to pick up the order. Usually pickup orders are ready the next day. Orders placed before 10am CST may be ready the same day. We will contact you when ready.
  • Our pickup hours are Mon-Thurs 8:30 am - 4:00 pm. Friday 8:30 am - Noon. 
  • Pickup Address: 7101 143rd Ave NW Suite O Ramsey. We are in the Energy Business Park located just off Highway 10. Please look for 'Harrison Specialties' on the sign outside the front door.

All items ship out of Minnesota.